2.Input mode: IN+ input positive, IN- input negative
3.Output mode: OUT+ output positive, OUT-output negative
4.The input voltage: 4.5-60V (Note: higher than 50v can not work for a long time)
5.Adjustment mode: firstly connect the input power supply (between 5-60V) and then use the multimeter to monitor the output voltage and adjust the potentiometer (generally turn the booster clockwise, reverse the buck)
6.Output voltage: (3-35V) continuously adjustable (no-load debugging is recommended).
7.Pressure difference: at least 1.5V
8.Output current: rated current 2A, no more than 3A
9.Output power: no more than 15W
10.Conversion efficiency: 92% or less (the higher the output voltage, the higher the efficiency),Static power consumption is only about 6mA
11.Connection mode: welding, after add pin can be directly welded on the PCB
12.Working temperature: industrial grade (- 40 to + 85 )
13.Load regulation: ± 1%
14.Voltage regulation: ± 0.5%
15.Short circuit protection: current limiting, overheating protection