- Your cart is empty
- Continue Shopping
PIC12F675 I/SN (SOP-8)
PIC12F675 I/SN (SOP-8)
PIC12F675 I/SN (SOP-8) 8-Pin Flash-Based 8-Bit CMOS Microcontrolle:
• Standby Current:
– 1 nA @ 2.0V, typical
• Operating Current:
-8.5A @ 32 kHz, 2.0V, typical
-100A @ 1 MHz, 2.0V, typical
Product Description
DESCRIPTION:
-
The PIC12F629 and PIC12F675 devices are covered by this Data Sheet. They are identical, except the PIC12F675 has a 10-bit A/D converter.
-
They come in 8-pin PDIP, SOIC, MLF-S and DFN packages.
Features:
• Internal and External Oscillator Options
– Precision Internal 4 MHz oscillator factory calibrated to ±1%
– External Oscillator support for crystals and resonators
-5s wake-up from Sleep, 3.0V, typical
• Power-Saving Sleep mode
• Wide Operating Voltage Range – 2.0V to 5.5V
• Industrial and Extended Temperature Range
• Low-Power Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Brown-out Detect (BOD)
• Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
• Multiplexed MCLR/Input Pin
• Interrupt-on-Pin Change
• Individual Programmable Weak Pull-ups
• Programmable Code Protection
• High Endurance Flash/EEPROM Cell
– 100,000 write Flash endurance
– 1,000,000 write EEPROM endurance
– Flash/Data EEPROM Retention: > 40 years
Low-Power Features:
• Standby Current:
– 1 nA @ 2.0V, typical
• Operating Current:
-8.5A @ 32 kHz, 2.0V, typical
-100A @ 1 MHz, 2.0V, typical
• Watchdog Timer Current
– 300 nA @ 2.0V, typical
• Timer1 Oscillator Current:
-4A @ 32 kHz, 2.0V, typical
Peripheral Features:
• 6 I/O Pins with Individual Direction Control
• High Current Sink/Source for Direct LED Drive
• Analog Comparator module with:
– One analog comparator
– Programmable on-chip comparator voltage reference (CV REF) module
– Programmable input multiplexing from device inputs
– Comparator output is externally accessible
• Analog-to-Digital Converter module (PIC12F675):
– 10-bit resolution
– Programmable 4-channel input
– Voltage reference input
• Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
• Enhanced Timer1:
– 16-bit timer/counter with prescaler
– External Gate Input mode
– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
• In-Circuit Serial Programming (ICSP ) via two pins
Reviews
There are no reviews yet.