Product Description

DESCRIPTION:

•  The Teensy is a breadboard-friendly development board with loads of
  features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a
  bootloader so you can program it using the onboard USB connection; no external
  programmer needed! You can program for the Teensy in your favorite program editor
  using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino
  sketches for it!
• The processor on the Teensy also has access to the USB and can emulate any kind of
  USB device you need it to be, making it great for USB-MIDI and other HID projects. The
  32-bit, 180MHz processor brings a few other features to the table as well, such as
  multiple channels of Direct Memory Access, several high-resolution ADCs and even an
  l2S digital audio interface! There are also four separate interval timers plus a delay timer!
  Oh yeah, and all digital pins have interrupt capability and are 3.3V tolerant.

Features:

180 MHz ARM Cortex-M4 with Floating Point Unit.
1M Flash, 256K RAM, 4K EEPROM.
Microcontroller Chip MK66FX1MOVMD18.

USB High Speed (480Mbit/sec) Port.

2. CAN Bus Ports.

32 General Purpose DMA Channels.

22 PWM Outputs.

4 12C Ports.

11 Touch-Sensing Inputs.

62 I/O Pins (42 breadboard friendly)

25 Analog Inputs to 2 ADCs with 13-bit resolution
2 Analog Outputs (DACs) with 12-bit resolution
USB Full Speed (12Mbit/sec) Port.

Ethernet mac, capable of full 100Mbit/sec speed
Native (4-bit SDIO) micro SD card port.

l2S Audio Port, 4-Channel Digital Audio Input & Output
14 Hardware Timers.

Cryptographic Acceleration Unit.

Random Number Generator.

CRC Computation Unit.

6 Serial Ports (2 with FIFO and Fast Baud Rates).

3 SPI Ports (1 with FIFO).
Real-Time Clock.