MX25L128:

  • The MX25L12805D is a CMOS 134,217,728 bit serial Flash Memory, which is configured as 16,777,216 x 8 internally.
  • Single Power Supply Operation
    – 2.7 to 3.6 volt for read, erase, and program operations
  • Latch-up protected to 100mA from -1V to Vcc +1V
  •  Low Vcc write inhibit is from 1.5V to 2.5V
SKU: SLY-IC249 Category:

Product Description

DESCRIPTION:
  • The MX25L12805D is a CMOS 134,217,728 bit serial Flash Memory, which is configured as 16,777,216 x 8 internally.
  • The MX25L12805D features a serial peripheral interface and software protocol allowing operation on a simple 3- wire bus.
  • The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input.
  • The MX25L12805D provides sequential read operation on whole chip. User may start to read from any byte of the array. While the end of the array is reached, the device will wrap around to the beginning of the array and continuously outputs data until CS# goes high.
  • Technical sheet: https://pdf1.alldatasheet.com/datasheet-pdf/view/267916/MCNIX/MX25L12805D.html

FEATURES GENERAL:

• Serial Peripheral Interface compatible — Mode 0 and Mode 3
• 134,217,728 x 1 bit structure
• 4096 equal sectors with 4K byte each 256 equal sectors with 64K byte each
– Any sector can be erased
• Single Power Supply Operation
– 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.5V to 2.5V
ELECTRICAL SPECIFICATIONS:
  • Ambient Operating Temperature: -40°C to 85° C for Industrial grade
  • Storage Temperature: -55°C to 125°C
  • Applied Input Voltage: -0.5V to 4.6V
  • Applied Output Voltage : -0.5V to 4.6V
  • VCC to Ground Potential: -0.5V to 4.6V

Reviews

There are no reviews yet.

Be the first to review “MX25L128”

Your email address will not be published. Required fields are marked *

Back to top