Product Description

DESCRIPTION:

• Working voltage: 11-12.5v (vcc connect to positive power supply; gnd connect to negative power supply; nc, with, without connection with output)
• Module specification: l65 * w56 * h21mm
• Module type: learning type (infrared remote control in nec format)
• Working current: = 160ma
• Working mode: automatic lock, advanced, random switch lock
• Operation indication: d5 (power indicator), d6 (learning indicator), sdra (relay switching indicator)

How to use :

There are 4 keys in total: s1, s2, s3, s4, 4-channel infrared remote control receiving board can be learned independently (low level model):

• The first learning channel: after power on, press s1 key then loosen; the learning light will flash once. press the ch1 key all the time and the learning light will flash three times quickly, then go out; represents the key ch1 corresponding successfully to the first channel
• The second learning channel: after power on, press s2 key, then loosen; the learning light will flash once. press the ch2 key all the time and the learning light will flash three times quickly, then turn off; represents the key ch2 successfully matches the second channel
• The third learning channel: after power on, press s3 key, then loosen; the learning light will flash once. press the ch3 key all the time and the learning light will flash three times quickly, then turn off; represents the key ch3 successfully matches the third channel
• The fourth learning channel: after power on, press s4 key, then loosen; the learning light will flash once. press the ch4 key all the time and the learning light will flash three times quickly, then go out; represents the key ch4 successfully matches the fourth channel
• Full learning: after power on, press s3 and s4 simultaneously; then, loosen the two keys, the learning light will flash twice. Press the power button on the remote control, and the learning light will flash quickly three times, then turn off. this represents the total shutdown successfully matches.

Mutual switch working steps with automatic locking, locking, inching:

• Lock: when power off, press s2 learning key and power on; the indicator will flash quickly three times, set as locking output (press the key on the remote control, the corresponding output channel will be output while the other channels are all closed and no output)
• Automatic lock: when power off, press s3 learning key and power on; the indicator will flash quickly three times, set as automatic locking output (press the key on the remote control, the refusal of the corresponding output channel will not affect the state of other channels; if you loosen the key, the state of output will remain)
• Insertion: when power off, press s4 learning key and power on; the indicator will flash quickly three times, set as input output (press the key on the remote control, the corresponding channel will output; if you loosen the key, the output will stop).