STEPPER MOTOR 28BYJ-28

SKU: SLY8345 Category: Stepping Motors

Product Description

The rotation angle of the motor is proportional to the input pulse.
The motor has full torque at standstill(if the windings are energized)
Precise positioning and repeatability of movement since good stepper motors have an accuracy of – 5% of a step and this error is non cumulative from one step to the next.
Excellent response to starting/stopping/reversing.
Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.
The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft.
A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.

TECHNICAL SPECIFICATIONS:
Model	– 28BYJ-48
Rated Voltage	– 5V DC
Number of Phases	– 4
Speed Variation Ratio	– 1/64
Stride Angle	– 5.625°
Frequency	– 100Hz
DC Resistance	– 50ohms ±7%(25°C)
Idle In-Traction Frequency	– >600Hz
Idle Out-Traction Frequency	– >1000Hz
In-Traction Torque	– >34.3mN.m(120Hz)
Self-Positioning Torque	– >34.3mN.m
Friction Torque	– 600-1200gf.cm
Pull in Torque	– 300gf.cm
Insulated Resistance	– >10MΩ(500V)
Insulated Electricity Power	– 600V AC / 1mA / 1s
Insulation Grade	– A
Rise in Temperature	– <40K (120Hz)
Noise	– <35dB (120Hz, No Load, 10cm)