Product Description

CCPM Gear Servo Tester, 3CH 4.8-6V Consistency Checker Master with Indicator Light

Specifications:

(1) output: ≤ 15mA (5.0)

(2) Input: DC 4.2-6.0v

(3) Output signal: 1.5ms ± 0.5ms

(4) Size: 46*32*17MM

(5) weight: 8g

(6) adjustment: manual, automatic and the median.

Features: The ability to easily detect and configure server virtual spaces, jitter and median.

Can be connected to two servos or ESC; MCU control, good stability and high precision. Turn the knob, the direction can be detected.

If you connect an electronic governor (brush or brushless available), you can get rid of remote control devices for manual speed control, used to test tone

Motor speed or performance is very convenient, it is no longer cumbersome to connect the remote control and the receiver. It is equivalent to a “hand”

“Mobile receiver” function, analog transmitters for playing via rudder button

Instructions: refer to the picture below, then steering to the left, divided to the lower three groups, which can be accessed three servos; Right a row of pins connected to the power supply, near the edge is negative (to see the identification symbol), then the battery negative, careful not reversed, If the power supply is reversed, the IC identifiers; S corresponding to the pin, whatever. Power on, the blue light lights up simultaneously, then only the left light of the first, in order to manually adjust the potentiometers test, press the button, the middle lights, the standardized test; third lights, self test. ESC test connection and access servos, because you need to take the ESC test motor first!