Product Description

DESCRIPTION:

• The Arduino Uno board is based on an ATMega328 clocked at 16 MHz. It is the simplest and most economical microcontroller board from Arduino. Connectors located on the outer edges of the printed circuit allow you to plug in a series of additional modules.
• This card can be programmed with the Arduino software available for free download at this address.
• The ATMega328 microcontroller contains a bootloader which allows the program to be modified without going through a programmer. This card comes with a plastic support but without a USB cord (see recommended items).

Main Features:

• Alimentaion: – via USB port or. – 7 to 12 V on 5.5 x 2.1 mm power supply connector.
• Microprocessor: ATMega328.
• Flash memory: 32 kB.
• SRAM memory: 2 kB.
• EEPROM memory: 1 kB.
• Interfaces: – 14 I/O pins including 6 PWM. – 6 10-bit analog inputs. – Serial bus, I2C and SPI.
• Current per I/O: 40 mA.
• Clock: 16 MHz. Interrupt management.
• USB-B plug.
• Version: Rev. 3.
• Dimensions: 74 x 53 x 15mm.