- Your cart is empty
- Continue Shopping
CFEON 25Q64
CFEON 25Q64
Q64 104hip 25q64 En-25q64 En25 Memoria 64 Mbit Cfeon Soic8:
The EN25Q64 is a 64 Megabit (8192K-byte) Serial Flash memory, with advanced write protection mechanisms. The EN25Q64 supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output as well as Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ 0 (DI), DQ1 (DO), DQ2 (WP#) and DQ3 (NC).
Product Description
DESCRIPTION:
- The EN25Q64 is a 64 Megabit (8192K-byte) Serial Flash memory, with advanced write protection mechanisms. The EN25Q64 supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output as well as Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ 0 (DI), DQ1 (DO), DQ2 (WP#) and DQ3 (NC). SPI clock frequencies of up to 80MHz are supported allowing equivalent clock rates of 160MHz for Dual Output when using the Dual Output Fast Read instructions, and SPI clock frequencies of up to 50MHz are supported allowing equivalent clock rates of 200MHz for Quad Output when using the Quad Output Fast Read instructions.
- The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
-
The EN25Q64 is designed to allow either single Sector/Block at a time or full chip erase operation.
-
The EN25Q64 can be configured to protect part of the memory as the software protected mode.The device can sustain a minimum of 100K program/erase cycles on each sector or block.
FEATURES:
•Single power supply operation
– Full voltage range: 2.7-3.6 volt
•Serial Interface Architecture
– SPI Compatible: Mode 0 and Mode 3
•64 M-bit Serial Flash
– 64 M-bit/8192 K-byte/32768 pages
– 256 bytes per programmable page
•Standard, Dual or Quad SPI
– Standard SPI: CLK, CS#, DI, DO, WP#
– Dual SPI: CLK, CS#, DQ, DQ, WP#
– Quad SPI: CLK, CS#, DQ, DQ1, DQ2, DQ3
•High performance
– 104MHz clock rate for one data bit
– 80MHz clock rate for two data bits
– 50MHz clock rate for four data bits
•Low power consumption
– 12 mA typical active current
– 1μA typical power down current
Reviews
There are no reviews yet.