STEPPER MOTOR 28BYJ-28

STEPPER MOTOR 28BYJ-28:

  • A stepper motor transforms an electrical impulse into an angular movement
  • It is usually used in projects such as 3D printer
SKU: SLY8345 Category:

Product Description

FEATURES:

  • The rotation angle of the motor is proportional to the input pulse.
  • The motor has full torque at standstill(if the windings are energized)
  • Precise positioning and repeatability of movement since good stepper motors have an accuracy of – 5% of a step and this error is non cumulative from one step to the next.
  • Excellent response to starting/stopping/reversing.
  • Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.
  • The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
  • It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft.
  • A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.

 

TECHNICAL SPECIFICATIONS:

  • Model
– 28BYJ-48
  • Rated Voltage
– 5V DC
  • Number of Phases
– 4
  • Speed Variation Ratio
– 1/64
  • Stride Angle
– 5.625°
  • Frequency
– 100Hz
  • DC Resistance
– 50ohms ±7%(25°C)
  • Idle In-Traction Frequency
– >600Hz
  • Idle Out-Traction Frequency
– >1000Hz
  • In-Traction Torque
– >34.3mN.m(120Hz)
  • Self-Positioning Torque
– >34.3mN.m
  • Friction Torque
– 600-1200gf.cm
  • Pull in Torque
– 300gf.cm
  • Insulated Resistance
– >10MΩ(500V)
  • Insulated Electricity Power
– 600V AC / 1mA / 1s
  • Insulation Grade
– A
  • Rise in Temperature
– <40K (120Hz)
  • Noise
– <35dB (120Hz, No Load, 10cm)

 

 

 

Reviews

There are no reviews yet.

Be the first to review “STEPPER MOTOR 28BYJ-28”

Your email address will not be published. Required fields are marked *

Back to top