ANYCUBIC 3D Printer Mega Zero
US ANYCUBIC Mega Zero 2.0 3D Printer DIY 220*220*250mm High-Precision Easy Level
Product Description
DESCRIPTION:
- The Anycubic Mega Zero is a 3D printer model to assemble in a fairly simple way and of a fairly traditional general design.
- Its frame is aluminum and the whole appears very stable. The spool holder is placed above the printer. Its dimensions are 504 mm × 396 mm × 607 mm for a weight of 6.4 kg.
- The printing volume is good, 22*22*25 cm with a non-heating plate. This is not compulsory for PLA, TPU, HIPS, PETG or even wood filaments, but this limits the risks of delamination. The quality of the tray coating will be a point to check during a test of the Anycubic Mega Zero. The test prints presented on the page are envious. The indicated speed is 20 to 100 mm/s with a recommended speed of 60 mm/s.
FEATUES:
- Technical Specification
- Printing Technology: FDM (Fused Deposition Modeling)
- Build Size: 220mm(L)×220(W)×250mm(H)
- Layer Resolution: ±0.1mm
- Positioning Accuracy: X/Y/Z 0.0125/0.0125/0.002mm
- Extruder Quantity: Single
- Nozzle Diameter: 0.4 mm
- Print Speed: 20~100mm/s (suggested 60mm/s)
- Supported Materials: PLA, TPU, HIPS, PETG, Wood
SPECIFICATION:
- Temperature
- Ambient Operating Temperature: 8°C – 40°C
- Operational Extruder Temperature: max 255°C
- Software
- Slicer Software: Cura
- Software Input Formats: .STL, .OBJ, .AMF
- Software Output Formats: GCode
- Connectivity: Trans-flash Card; USB cable(expert users only)
- Electrical
- Input rating: 100V/240V AC, 50/60Hz
- output rating: 12V/6A(72W)
- Physical Dimensions
- Printer Dimensions: 504mm×396mm×607mm
- Weight: ~6.4kg
Reviews
There are no reviews yet.